K 3500 Truck 4WD V8-5.7L VIN R (1998)
6. Install the range select lever cable end to the steering column shift control.
7. Install the steering column filler panel to the steering column.
8. Install the carpet and the carpet retainers on the driver's side.
9. Install the door sill trim plate. Refer to Door Door Sill Plate Replacement in Interior Trim.
10. Install the hinge pillar trim panel. Refer to Trim Panel Replacement-Hinge Pillar in Interior Trim.
11. Install the front seat. Refer to Seat Replacement-Bench, Seat Replacement-Split Bench, or Seat Replacement-Front Bucket in Seats.
12. Make sure that the steering column transmission shift lever is in Park (P).
13. Raise the vehicle. Support the vehicle with safety stands. Refer to Vehicle Lift Points.
14. Route the range select lever cable under the fuel lines.
15. Connect the range select lever cable to the rear transmission bracket.
16. Install the range select lever cable retainer to the transmission cable bracket.
17. Remove the black shipping clip from the new range select lever cable. Discard the clip.
18. Install the range select lever cable end to the transmission range select lever. Push the cable end onto the transmission range select lever stud ball.
19. Adjust the range select lever cable.
