K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
8. Remove wheel speed sensor cable electrical connector (1).
IMPORTANT: It is not necessary to replace the sensor mounting bracket unless there is visible damage or distortion to the mounting bracket.
9. Remove the wheel speed sensor (3) from the mounting bracket (4).
INSTALLATION PROCEDURE
NOTICE: The wheel speed sensor used on the C 350OHD models is adjustable by means of slots provided in the mounting bracket. The sensor must
be properly adjusted in order to provide the correct air gap between the wheel speed sensor and the tone wheel. If the sensor is not properly adjusted,
the tone wheel may hit the wheel speed sensor, or the output from the wheel speed sensor may be low, missing or erratic. Follow the procedure
outlined below to properly adjust the front wheel speed sensor.
1. Install the wheel speed sensor (3) to the mounting bracket (4).
2. Install wheel speed sensor to bracket mounting nuts (5).
3. Run down the nuts but do not torque. The wheel speed sensor must remain loose and move along the slots in the bracket.
