K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
4. Disconnect the temperature and mode cables from the back of the control head.
5. Disconnect the electrical connection from the control head.
6. Remove the control head.
INSTALLATION PROCEDURE
1. Connect the electrical connection to the control head
2. Connect the temperature and mode cables to the back of the control head.
3. Install the control head to the IP carrier until a snap is heard.
4. Install the radio.
5. Install the bezel-IP cluster.
Control Assembly Replacement - AUX (Suburban-Center Overhead)
