K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Tighten
Tighten the hose assembly to 45 N.m (33 lb ft).
4. Coat the new dual O-ring seals with 525 viscosity refrigerant oil.
5. Install the new dual O-ring seals to the accumulator hose.
6. Connect the hose assembly to the accumulator.
Tighten
Tighten the hose assembly to 34 N.m (25 lb ft).
7. Install the sealing washers.
8. Connect the hose assembly to the top of the compressor.
9. Install the bolt.
Tighten
Tighten the bolt to 34 N.m (25 lb ft).
10. Install the grille.
11. Connect the negative battery cable.
12. Charge the system. Refer to Refrigerant Recovery and Recharging See: Refrigerant/Service and Repair
13. Inspect the system for leaks. Refer to Leak Testing. See: Testing and Inspection