K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
License Plate Lamp: Service and Repair
License Lamp Replacement (With Bumper)
License Lamp Replacement (W/ Step Bumper)
REMOVAL PROCEDURE
1. Make sure the headlamp switch is in the OFF position.
2. Remove the lens (3) from the lamp assembly.
3. Remove the bulb (2).
INSTALLATION PROCEDURE
1. Install the bulb (2).
2. Install the lens (3) to the lamp assembly.
3. Install the wiring (4) to the back of the lens assembly.
License Lamp Replacement (W/O Step Bumper)
REMOVAL PROCEDURE
1. Make sure the headlamp switch is in the OFF position.
2. Remove the lens from the lamp assembly.
3. Remove the bulb.
