K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Turn Signal Lamp: Service and Repair
Tail/Turn Signal Lamp Replacement
REMOVAL PROCEDURE
1. Make sure the headlamp switch is in the OFF position.
2. Lower the endgate or open the cargo doors.
IMPORTANT: Z-71 Tahoes have a rear tail lamp cover. Once the cover is installed removal will result in breakage of the cover.
3. Remove the 2 screws retaining the tail/turn signal lamp assembly to the body.
4. Rotate the tail/turn signal lamp assembly from the vehicle.