K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Turn Signal Lamp: Service and Repair
Park/Turn Signal Lamp Replacement (Luxury)
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Remove the negative battery cable.
2. Remove the park/turn signal lamp assembly (5).
3. Remove the park/turn signal bulbs/connectors (6) from the lamp assembly.
INSTALLATION PROCEDURE
1. Install the park/turn signal bulbs/connectors (6) to the lamp assembly.
2. Install the park/turn signal lamp assembly by sliding the tabs (7) into the grille slots.
NOTE: Refer to Fastener Notice in Cautions and Notices.
3. Install the screws (4).
Tighten
Tighten the screws to 1.5 N.m (13 lb in).
4. Install the negative battery cable.
