K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Headlamp Control Module: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Remove the negative battery cable.
2. Remove the control module from the retainer.
3. Disconnect the electrical connectors (3).
4. Remove the control module (2).
INSTALLATION PROCEDURE
1. Connect the electrical connectors (3).
2. Install the control module (2).
3. Install the control module to the retainer.
4. Install the negative battery cable.
