K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Caution: When you are carrying an undeployed inflator module:
^
Do not carry the inflator module by the wires or connector on the inflator module
^
Make sure the bag opening points away from you
When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module
rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free
space for the air bag to expand in case of an accidental deployment Otherwise, personal injury may result.
11. Place the module with the vinyl trim cover facing up and away from the surface on a work bench.
12. Clear a space on the ground about 1.85 meter (6 ft) in diameter for deployment of the module. If possible, use a paved, outdoor location free of
activity. Otherwise, use a space free of activity on the shop floor. Ensure that you have sufficient ventilation.
13. Ensure no loose or flammable objects are in the area.
14. Place the module in the space with the vinyl trim cover facing up.
15. Extend the SIR deployment harness and adapter to full length from the module.
16. Place a 12 volt minimum/2A minimum power source (i.e., vehicle battery) near the shorted end of the harness.
