K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
4. Remove the seat belt and retractor.
5. Remove the nuts holding the buckle assembly to the studs.
6. Remove the buckle assembly.
Suburban Removable Rear Seat
1. Install the buckle assembly to the floor panel stud.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the nuts to the buckle assembly.
Tighten
Tighten the nuts to 42 N.m (31 lb ft).
3. Install the bolt through the seat belt retractor to the weld nut.
Tighten
Tighten the bolt to 55 N.m (41 lb ft).
4. Install the quarter trim panel.
5. Install the bolt to the upper anchor plate.
Tighten
Tighten the bolt to 55 N.m (41 lb ft).
6. Install the rear seat.
2 Door Utility