K 3500 Truck 4WD V8-6.5L DSL Turbo VIN S (1999)
Control Arm: Service and Repair
Front Upper
REMOVAL PROCEDURE
1. Raise the vehicle. Support the vehicle with suitable safety stands.
2. Remove the tire and wheel assembly.
3. Remove the air cleaner extension, if necessary.
4. Remove the brake hose.
4.1. Remove the nut and the screw.
4.2. Remove the bracket and the hose.
4.3. Tie the hose out of the way.
5. Remove the cotter pin.
6. Remove the nut.
7. Disconnect the upper control arm from the knuckle.
8. Remove the nuts.
9. Remove the bolts.
10. Remove the upper control arm.
11. Remove the bushings.
INSTALLATION PROCEDURE
1. Install the bushings.
2. Install the upper control arm to the frame.
