K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Rear Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Side Door Opening
REMOVAL PROCEDURE
1. Open both doors.
2. Remove the sill plate.
3. Remove the hinge pillar trim pillar.
4. Remove the windshield pillar molding.
5. Remove the weatherstrip from the rear side door opening.
INSTALLATION PROCEDURE
1. Install the weatherstrip from the rear side door opening fully seating the weatherstrip into the channel.
2. Install the windshield pillar molding.
3. Install the hinge pillar trim pillar.
4. Install the sill plate.
5. Check door closing effort and seal to door fit.
