K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
10. Remove the carpet from the vehicle.
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material
size as the original installation. Always return the carpet to the original location.
1. Install the carpet to the vehicle.
2. Install the I/P supporting post lower bolt.
3. Install the rear quarter trim panel.
4. Install the jack assembly.
5. Install the shift lever and boot, if equipped.
6. Install the center seat, if equipped.
7. Install the floor storage console.
8. Install the front seats.
9. Install the front door sill plates.
10. Install the hinge pillar trim panel.
Rear Floor Panel Carpet Replacement
Rear Floor Panel Carpet Replacement
Removal Procedure
1. Remove the rear seat.
2. Remove the second rear seat if equipped.
3. Remove the rear door sill trim plates.
4. Remove the endgate or the liftgate door sill trim plate.
5. Remove the trim panels for the rear quarter.
