K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
5. Remove the tool kit from the vehicle.
Installation Procedure
1. Install the tool kit and the retaining nut.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the jack and the bracket with the retaining nut.
Tighten the nuts to 9 N.m (80 lb in).
3. Install the nut retaining the tool stowage cover, if equipped.
Rear Quarter Trim Panel Replacement (Extended Cab Pickup)
Rear Quarter Trim Panel Replacement (Extended Cab Pickup)
Removal Procedure
1. Remove the rear seat, if necessary.
2. Remove the rear window molding.
3. Remove the arm rest screw.
4. Remove the armrest.
5. Remove the sill trim plates.