K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
1. Attach the foam pad (3) to the seat back frame.
2. Pull the trim cover (4) over the seat.
3. Install the head restraint retainers (1).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the side bolts (1).
Tighten the side bolts to 35 N.m (26 lb ft).
5. Connect the seat back trim cover J-clip.
6. Install the head restraints (1).
7. Install the rear seat in the vehicle.
