K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Tailgate Release Handle: Service and Repair
Endgate Linkage Replacement (Pickup)
Endgate Linkage Replacement (Pickup)
Removal Procedure
1. Lower the endgate.
2. Loosen the endgate handle bolts. Refer to Endgate Handle Replacement (Pickup) Endgate Handle Replacement (Utilities).
3. Raise the endgate.
4. Remove the handle bezel by prying gently on the upper snap-in tabs.
5. Lower and support the endgate.
6. Remove the endgate latch assembly.
7. Disengage the linkage rod from the latch assembly.
8. Remove the linkage rod (1) from the endgate handle assembly.
Installation Procedure