K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
5. Remove the master cylinder mounting nuts.
6. Remove the master cylinder.
7. Remove the master cylinder reservoir.
Installation Procedure
1. Install the master cylinder reservoir.
2. Bench bleed the master cylinder.
3. Install the master cylinder.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the master cylinder mounting nuts.
^
Tighten the nuts to 36 Nm (27 ft. lbs.).
5. Remove the pipe caps.