K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Coolant Line/Hose: Service and Repair
Turbocharger Coolant Hoses/Pipes Replacement
Turbocharger Coolant Hoses/Pipes Replacement
^
Tools Required
-
J 43181 Heater Line Quick Connect Release Tool
Removal Procedure
1. Remove the upper intake sight shield assembly using the following procedure:
1.1.
Remove the retaining bolt in the front of the shield.
1.2.
Lift-up on the front of the shield.
1.3.
Lift the shield off the rear bracket.
2. Drain the engine coolant.
3. Disconnect both battery negative cables.
Important: After removing the charged air cooler ducts, cover the turbocharger openings and the ducts with tape to prevent entry of objects.
4. Remove the air cleaner outlet duct from the air cleaner and the turbocharger.
5. Loosen both of the charged air cooler outlet duct to intake hose clamps.
