K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
1. Install the camshaft thrust plate to the camshaft.
2. Install the camshaft driven gear.
3. Install the camshaft driven gear bolt. Leave the bolt finger tight.
4. Install the camshaft and gear assembly into the cylinder block, aligning the camshaft gear to the crankshaft gear as shown.
5. Apply threadlocker GM P/N 12345493 or equivalent to the threads of the camshaft thrust plate bolts.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the camshaft thrust plate bolts.
^
Tighten the camshaft thrust plate bolts to 26 Nm (19 ft. lbs.).
