K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
7. Install the camshaft reluctor to the camshaft gear.
8. Install the camshaft reluctor bolts.
^
Tighten in a cross-bolt pattern the camshaft reluctor bolts to 9 Nm (80 inch lbs.).
9. Reinstall the J 44643 in the starter opening. if removed.
10. Install the camshaft gear bolt.
^
Tighten the camshaft gear bolt to 234 Nm (173 ft. lbs.).
11. Using the J 26900-12 (1) and the J 26900-13 (2) measure the camshaft end play.
^
The production value is 0.050 - 0.114 mm (0.002 - 0.0045 inch) and service limit is 0.20 mm (0.008 inch).
^
Replace the camshaft gear or the camshaft thrust plate if measured value exceeds the service limit.