K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
lifter.
6. Lubricate the following with clean engine oil during installation:
^
Rocker arm shaft bolt threads
^
Tops of the push rods
^
Rocker arms
^
Rocker arm shaft
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the rocker arm shaft assembly to the cylinder head.
^
Tighten the rocker arm shaft bolts to 41 Nm (30 ft. lbs.) in the proper sequence.
8. Adjust the valve clearance.
9. Install the lower valve rocker arm cover.
