K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Heat Shield: Service and Repair
Floor Panel Heat Shield Replacement
Floor Panel Heat Shield Replacement
Removal Procedure
1. Remove the exhaust manifold pipe, if necessary.
2. Remove the catalytic converter, if necessary.
3. Remove the exhaust front heat shield nuts.
4. Remove the exhaust front heat shield from the studs.
5. If vehicle is a regular cab pick-up truck, remove the exhaust heat shield nuts.
6. Remove the exhaust front heat shield (1) and/or the exhaust heat shield (2) from the studs.
7. If vehicle is a extended cab pick-up truck, remove the exhaust heat shield nuts.
8. Remove the exhaust heat shield (1, 2) from the studs.
