K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
9. If vehicle is a crew cab pick-up truck, remove the exhaust heat shield nuts.
10. Remove the exhaust heat shield(s) from the studs.
11. If vehicle is a sport utility vehicle, remove the exhaust heat shield nuts.
12. Remove the exhaust heat shield from the studs.
Installation Procedure
1. If vehicle is a sport utility vehicle, install the exhaust heat shield to the studs.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the exhaust heat shield nuts.
^
Tighten the exhaust heat shield nuts to 9 Nm (80 inch lbs.).
