K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
1. Install the exhaust manifold pipe seal(s).
2. Raise the catalytic converter or exhaust manifold pipe using the adjustable jackstands.
3. If equipped with a 6.0L or 8.1L engine, perform the following:
Notice: Refer to Fastener Notice in Service Precautions.
^
Install the exhaust hanger mounting bracket bolts.
^
Install the left exhaust manifold pipe nuts.
^
Tighten the transmission bolts to 100 Nm (74 ft. lbs.).
^
Tighten the exhaust pipe hanger bracket bolts to 12 Nm (106 inch lbs.).
^
Tighten the exhaust manifold pipe nuts to 50 Nm (39 ft. lbs.).
4. If equipped with a 6.0L or 8.1L engine, install the right exhaust manifold pipe nuts.
^
Tighten the exhaust manifold pipe nuts to 50 Nm (39 ft. lbs.).
