K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
^
Clip the oxygen sensor electrical connector to the hose clip.
10. If equipped with a 4.3L, 4.8L, or 5.3L engine, perform the following:
^
Connect the forward oxygen sensor electrical connector.
^
Connect the CPA retainer.
^
Install the clip around the engine harness and the oxygen sensor pigtail.
11. Install the oil pan skid plate and bolts, if necessary.
^
Tighten the oil pan skid plate bolts to 20 Nm (15 ft. lbs.).
12. Install the engine shield and bolts, if necessary.
13. Lower the vehicle.
^
Tighten the engine shield bolts to 20 Nm (15 ft. lbs.).
13. Lower the vehicle.