K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
16. Use the J 6083 in order to install the following components:
-
The pulley rotor (1)
-
The retainer ring (2)
17. Install the clutch plate and hub assembly.
"For a description of the RPO Code(s) shown in this article or any of the images therein, refer to the RPO Code List found at Vehicle/Application ID".
See: Application and ID/RPO Codes
Compressor Clutch Coil Removal
1. Remove the clutch plate retaining bolt (1).
2. Remove the clutch plate assembly.
3. Remove the clutch hub/bearing snap ring.
4. Remove the clutch hub/bearing assembly.
5. Remove the clutch coil connector bracket retaining screw.
6. Remove the clutch coil snap ring.
7. Remove the clutch coil assembly.
Compressor Clutch Coil Install
