K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
1. Install the blower motor control processor (2) to the HVAC module (1).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the blower motor control processor retaining screws.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
3. Connect the electrical connector (4) to the blower motor control processor (2).
4. Connect the electrical connector at the blower motor.
Blower Motor Processor Replacement - Auxiliary
REMOVAL PROCEDURE
