K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Tail Lamp: Service and Repair
Tail/Turn Signal Lamp Replacement
REMOVAL PROCEDURE
1. Ensure that the headlamp switch is in the OFF position.
2. Lower the end gate.
3. Remove the 2 screws retaining the tail/turn signal lamp assembly to the body.
4. Identify the bulb in need of replacement
-
The top bulb is a parking lamp and stop lamp
-
The center bulb is a turn indicator lamp
-
The lower bulb is a backup lamp
5. Turn the socket assembly.
6. Remove the socket assembly from the housing.
INSTALLATION PROCEDURE
1. Turn the socket.
2. Lock the socket in place.
3. Install the tail/turn signal lamp assembly to the vehicle with the 2 screws.
