K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Fluid - M/T: Service and Repair
NV 4500
Fluid Replacement
Removal Procedure
1. If the fluid is contaminated use a suitable container under the transmission.
2. Remove the oil fill plug.
3. Remove the lower center PTO bolt.
4. Drain the fluid.
Installation Procedure
1. Apply a thin bead of sealant GM P/N 12345739 to the PTO cover bolt.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the cover bolt.
^
Tighten the bolt to 41 Nm (30 ft. lbs.).
