K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
6. Connect the A/C compressor hose assembly to the accumulator using new sealing washers.
7. Install the NEW nut to the accumulator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
8. Connect the A/C compressor hose assembly to the A/C compressor using new sealing washers.
9. Install the NEW A/C compressor hose assembly mounting bolt (2).
Tighten
Tighten the bolt to 34 N.m (25 lb ft).
10. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging.
11. Leak test the fittings of the component using the J 39400-A.
Evaporator Tube Replacement
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE