K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
SUCTION HOSE REPLACEMENT (W/ DENSO)
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
2. Remove the suction hose mounting bolt (3) from the compressor.
Discard the bolt.
3. Disconnect the suction hose (1) from the compressor.
4. Remove the compressor suction nut at the accumulator.
Discard the nut.
5. Disconnect the suction hose from the accumulator
6. Remove the suction hose assembly from the vehicle.
7. Discard all of the used sealing washers. Cap the system openings.
INSTALLATION PROCEDURE
