K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
8.
Remove the two fasteners retaining the MAF sensor from the original air cleaner and transfer the MAF sensor to the replacement air cleaner. If the
MAF sensor was judged to be contaminated in step 5, install a new MAF sensor, GM P/N 88892543, to the replacement air cleaner.
9.
Position the new air cleaner to the mounting tray and firmly seat the push-in retainers.
10.
Attach the air intake hose to the air cleaner assembly and secure the clamp.
11.
Connect the MAF sensor harness to the sensor.
12.
Recalibrate the ECM with the latest update. The calibrations are available from Techline starting September, 2001 on the TIS 2000 version TIS
10/2001 data update or later. Refer to the Tech 2 user guide for specific reprogramming instructions when using the scan tool.
13.
Remove the fender covers and close the hood.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer
