gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5984 > < Initial Inspection and Diagnostic Overview|Page 5982
Page 6
background image

Steps 33-40

2. A partial malfunction in the class 2 serial data circuit uses a different procedure from a total malfunction of the class 2 serial data circuit. The

following modules communicate on the class 2 serial data circuit:
^

Body Control Module (BCM)

^

Powertrain Control Module (PCM)

^

Automatic Transfer Case (ATC)

^

Electronic Brake Control Module (EBCM)

^

Inflatable Restraint Sensing and Diagnostic Module (SDM)

^

Instrument Panel Cluster (IPC)

^

Suspension Control Module (SCM)

^

HVAC Control Module

^

Automatic Transmission

^

Driver Information Center (DIC)

^

Memory Mirror Control Module

^

Memory Seat Control Module

^

OnStar(R)/Cellular Phone line

3. The following DTCs may be retrieved with a history status:

^

U1300

^

U1301

These DTCs are not the cause of the present condition.

4. A State of Health DTC with a history status may be present along with a U1000 or U1255 having a current status. This indicates that the

malfunction occurred when the ignition was ON.

5. Data link connector terminals 2 and 5 provide the connection to the class 2 serial data circuit and the signal ground circuit respectively.
7. A poor connection at terminal A would cause this condition but will not set a DTC.

Initial Inspection and Diagnostic Overview|Page 5984 > < Initial Inspection and Diagnostic Overview|Page 5982