K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
11. Disconnect the oil separator oil drain hose form the engine block.
12. Remove the nylon strap from the PCV oil separator.
13. Remove the oil separator assembly from the mounting bracket. Lift up on the oil separator to slide off of the bracket.
14. Disconnect the PCV hoses to the oil separator and the tee connector.
15. Remove the oil separator and hoses.
16. Inspect the all of the PCV hoses for damage.
17. Inspect the oil separator for cracks or damage.
18. Replace any parts found with damage.
Installation Procedure
