K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
8. Install the lower hose on the charged air cooler outlet pipe. The hose is marked for correct installation.
9. Install the clamps on the outlet hose but do not tighten.
10. Install the air outlet duct to intake manifold tube hose.
The hose is marked DUCT which connects to the air outlet duct.
The hose is marked ENG which connects to the intake manifold tube.
Align the marks on the hose with the alignment marks on the pipe and duct.
11. Position all of the clamps as shown for proper clearance.
Tighten
Tighten the air duct hose clamps to 6 N.m (53 lb in).
12. Inspect the routing of the air ducts to ensure they are not contacting anything. Adjust the ducts if necessary.
