K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
3. Remove the fuel pipes (2) using the following procedure:
^
For the return pipe, remove the fuel pipe from the retaining clips.
^
For a balance pump fuel line, disconnect the fuel pipe from the balance pump and the retaining clips.
INSTALLATION PROCEDURE
NOTE: Refer to Nylon Fuel Lines Notice in Service Precautions.
1. Install the fuel pipes (2) using the following procedure:
^
For the return pipe, install the fuel pipe to the retaining clips.
^
For a balance pump fuel line, connect the fuel pipe to the balance pump and the retaining clips.