K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
9. Loosen the air inlet duct to turbocharger clamp.
IMPORTANT: Do not use a screw driver or other tool to pry the hose loose. The hose can be torn or damaged. Loosen the hose by twisting.
10. Remove the air outlet duct to turbocharger air outlet hose from the turbocharger.
11. Loosen the air inlet duct to charged air cooler clamp.
12. Remove the air cooler inlet hose and pipe assembly from the vehicle. The assembly can be removed as one piece with the left front fender
wheelhouse inner panel removed.
13. Disassemble the hose and pipe assembly as required.
14. Inspect the hoses for cuts or tears.
15. Inspect the pipes for damage.
16. Replace the hose or pipe if damage is found.
INSTALLATION PROCEDURE
