K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Cargo Lamp Switch: Service and Repair
LAMP SWITCH ASSEMBLY REPLACEMENT - FRONT FOG LAMP AND CARGO LAMP
REMOVAL PROCEDURE
1. Remove the instrument cluster bezel. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gauges and Warning Indicators.
2. Remove the fog lamp switch and cargo switch from the housing.
3. Disconnect the electrical connector(s) from the fog lamp switch.
4. Remove the fog lamp and cargo lamp switch from the housing.
INSTALLATION PROCEDURE
1. Connect the electrical connector(s) to the fog lamp and cargo lamp switch.
2. Install the fog lamp switch into the housing.
3. Install the IP trim bezel to the instrument panel. Refer to Instrument Panel Cluster (IPC) Replacement in Instrument Panel, Gauges and Warning
Indicators.
