gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Steering Column Position Sensor > < Steering Angle Sensor|Locations|Page 2445
Page 2
background image

4. Install the bolt and the nut to the upper end of the shaft. Refer to Intermediate Steering Shaft Replacement - Upper in Steering Column - Tilt or

Intermediate Steering Shaft Replacement - Upper in Steering Column - Standard.

5. Connect the negative battery cable.
6. Enable the SIR system. Refer to Enabling the SIR System in Restraint Systems.

Steering Column Position Sensor > < Steering Angle Sensor|Locations|Page 2445