K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Four Wheel Drive Selector Switch: Service and Repair
Transfer Case - NVG 236/246-NP8 (Two Speed Automatic)
Transfer Case Shift Control Switch Replacement
Removal Procedure
1. Remove the instrument panel bezel trim piece.
2. Pull the tabs on the side of the transfer case driver control switch out.
3. Pull the transfer case driver control switch straight out from the panel.
Installation Procedure
Important: Make sure that the transfer case control switch is seated properly in the instrument panel. Before installing the instrument panel trim
bezel.
1. Install the transfer case driver control switch into the instrument panel.
