K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Fuse Block: Service and Repair
Instrument Panel Electrical Center Replacement (Fuse Block)
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable(s).
2. Remove the left side end panel.
3. Press on the clips on the top and the bottom in order to remove the fuse block from the Instrument Panel (IP) assembly.
4. Disconnect all wiring connectors from the fuse block.
5. Remove the fuse block from the vehicle.
INSTALLATION PROCEDURE
1. Connect all wiring connectors to the fuse block.
2. Position the fuse block onto the IP assembly.
3. Press on the clips on the top and the bottom of the fuse block and push in the clips until seated.
4. Install the left side end panel.
5. Connect the negative battery cable(s).
