K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
-
Tighten the upper control arm retaining nut to 50 Nm (37 ft. lbs.).
6. Install the brake hose and the bracket retaining bolt to the steering knuckle
-
Tighten the bolt to 9 Nm (80 inch lbs.).
7. Connect the outer tie rod to the steering knuckle. Refer to Tie Rod Replacement.
8. Install the wheel hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement.
9. Connect the RTD link rod to the sensor (if equipped). Refer to Front Position Sensor Link Assembly Replacement - Electronic Suspension.
10. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation.
11. Load the torsion bars. Refer to Torsion Bar Replacement.
12. Align the vehicle. Refer to Measuring Wheel Alignment.
13. Lower the vehicle.
