K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Rack and Pinion
Removal Procedure
Notice: Do not start the vehicle with any power steering gear inlet or outlet hoses disconnected. When disconnected, plug or cap all openings of
components. Failure to do so could result in contamination or loss of power steering fluid and damage to the system.
1. Remove the power steering outlet hose (4) from the power steering gear (3).
2. Remove the power steering outlet hose (4) from the power steering cooler (5).
Installation Procedure
1. Connect the power steering outlet hose (4) to the power steering cooler (5).
2. Connect the power steering outlet hose (4) to the power steering gear (3).
Notice: Refer to Fastener Notice in Service Precautions.
3. Connect the power steering outlet hose (2) to the power steering pump (1).
-
Tighten the hose connections to 28 Nm (20 ft. lbs.)
4. Bleed the power steering system. Refer to Bleeding the Power Steering System.
5. Inspect all the hose connections for leaks.
