gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Steering Column Position Sensor > < Steering - Revised Service Procedures|Page 13986
Page 1
background image

Steering Column Lock: Technical Service Bulletins
Steering Column Lock Feature - Deleted

File In Section: 02 - Steering

Bulletin No.: 01-02-35-003

Date: April, 2001

INFORMATION

Subject:
Deletion of Steering Column/Wheel Locking Feature on Vehicles With Automatic Transmissions

Models:
2001 Chevrolet and GMC C/K Pickup (Silverado, Sierra) and Utility (Tahoe, Suburban, Yukon, Denali, Yukon XL) Models
2002 Cadillac Escalade

Important:

This bulletin does not apply to vehicles exported to countries that follow E.U. Regulations.

Beginning with the 2001 model year, the steering column or steering wheel locking feature is no longer used on the above described vehicles when
equipped with an automatic transmission. In previous model years the feature would lock or prevent the steering column/wheel from being turned
when the ignition lock cylinder was in the "LOCK" position.

Please advise any customer that comments on their steering wheel not locking when the ignition lock cylinder is in the "LOCK" position that the
feature is no longer used on vehicles equipped with automatic transmissions. As a result, no repair attempts should be made.

Important:

The locking steering column or steering wheel feature is still used on the above described vehicles when equipped with manual transmissions.

DISCLAIMER

Steering Column Position Sensor > < Steering - Revised Service Procedures|Page 13986