K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
12. Rotate the inner tie rod housing (2) counterclockwise until the inner tie rod (1) separates from the rack (5).
13. Remove the old Loctite from the threads (2) of the rack (1) and the inner tie rod (3).
Assembly Procedure
1. Slide the shock dampener (4) forward onto the rack (3).
Important: Threads must be clean prior to Loctite application. Check Loctite (or equivalent) container for expiration date. USE only enough
LOCTITE to evenly coat threads.
2. Apply Loctite 262 (or equivalent) to the inner tie rod threads.
3. Attach the inner tie rod onto the rack (3).
4. Place a pipe wrench on the rack (3) next to the inner tie rod housing (2).
Notice: Refer to Fastener Notice in Service Precautions.
5. Place a torque wrench and J 34028 on the flats of the inner tie rod housing (2).
-
Tighten the inner tie rod to 100 Nm (74 ft. lbs.).
