K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
1. Install the transmission support to the frame. (15 series)
2. Install the transmission support to the frame. (25/35 series)
Notice: Refer to Fastener Notice.
3. Install the bolts and the nuts in order to retain the transmission support to the frame.
Tighten the nuts to 95 N.m (70 lb ft).
4. Lower the rear of the transmission.
5. Install the transmission mount to the transmission support.
6. Install the nuts in order to retain the transmission mount to the transmission support.
Tighten the nuts to 54 N.m (40 lb ft).
7. Remove the transmission jack.
8. Lower the vehicle.
