K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
Cross-Member: Technical Service Bulletins
Body/Frame - Revised Crossmember/Body Bolt Service
Bulletin No.: 05-08-61-005
Date: April 29, 2005
SERVICE MANUAL UPDATE
Subject:
Revised Crossmember/Body Mount Bolt Installation Information
Models:
1999-2005 Cadillac Full-Size Pickup and Utility Models
1999-2005 Chevrolet Full-Size Pickup and Utility Models
1999-2005 GMC Full-Size Pickup and Utility Models
This bulletin is being issued to revise all repair procedures that include reinstalling the front engine crossmember-to-frame bolts or any body mount bolts
in the Frame and Underbody sub-section of the Service Manual. Please replace the current information in the Service Manual with the following
information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.
Before reinstalling front engine crossmember-to-frame bolts or any body mount bolts, you must do the following:
1.
Remove all traces of the original thread locking material.
2.
Clean the threads of the bolt with denatured alcohol, or equivalent, and allow to dry.
3.
Apply Thread locker, P/N 12345493, (Canadian P/N 10953488).
Disclaimer
