K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
9. Remove the shock absorber mounting bolt at the lower control arm (15 Series).
10. The lower shock mounting bushing is serviceable by driving the bushing out with the appropriate tool.
11. Remove the shock absorber mounting bolt (2) at the lower control arm (25 Series).
12. Remove the shock absorber.
Installation Procedure
1. Install the shock absorber. Insert the stem through the hole in the shock bracket on the frame.
2. Align the shock absorber with the mounting holes in the lower control arm (15 Series).
3. Align the shock absorber with the mounting holes in the lower control arm (25 Series).
4. Install the shock absorber through the bolt (2) to the lower control arm.
Notice: Refer to Fastener Notice in Service Precautions.
