K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
8.
Insert the adjusting nut lock key into the keyway using one of the following procedures:
^
If the adjusting nut slot is in alignment with the keyway in the axle spindle, insert the adjusting nut lock key into the keyway in the axle
spindle.
Important:
Do not turn the adjusting nut more than one slot counterclockwise in order to align the adjusting nut slot with the keyway in the axle spindle.
^
If the adjusting nut slot is not aligned with the keyway in the axle spindle, turn the adjusting nut counterclockwise until the adjusting nut slot is
in alignment with the keyway in the axle spindle and insert the adjusting nut lock key.
9.
Install the retaining ring.
10.
Install the axle shaft. Refer to Rear Axle Shaft and/or Gasket Replacement.
11.
Inspect the lubricant level and add, if necessary. Refer to Lubricant Level Check.
12.
Lower the vehicle.
Disclaimer
