K 3500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2001)
7.
Remove the Converter Holding Strap J 21366.
8.
Install the J 46409 - Torque Converter Lifting Handles to the converter and lift the converter from the transmission. Place the converter in a
position so it may drain into a suitable receptacle.
9.
Rotate the transmission so that the pan is facing upward.
10.
Remove the transmission oil pan.
11.
Thoroughly clean the inside of the transmission pan.
12.
Remove and DO NOT REUSE the transmission suction filter.
13.
Rotate the transmission so the extension housing is pointing upward.
14.
Rotate the transmission selector shaft to its full clockwise position. This ensures that the transmission is in the "PARK" position.
15.
Use tool J 43769 Spanner Nut Wrench-4WD (1) and remove the output nut (2).
16.
Remove the output ball bearing assembly beveled retaining ring.
